- trustedLegacyCidrs now empty; eno1 is strictly WAN
- AdGuard rewrite retargets nordhammer.it → 10.0.0.1 (the new router IP)
- dnsmasq pins the bedroom camera (f0:a7:31:6c:50:4b) to 10.0.0.39
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- Input chain now accepts WAN traffic for every port in ports.toml so
external access (SSH, HTTP, HTTPS, game ports) works through the eero's
upstream port forwards during phase 1, and via our own DNAT in phase 2.
- Add AdGuard DNS rewrite nordhammer.it → 192.168.4.25 so LAN clients
hit the mediaserver directly instead of relying on eero hairpin NAT.
Target changes to 10.0.0.1 at phase 2 cutover.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Without this, the default-drop input policy blocked SSH and AdGuard DNS
from existing 192.168.4.x clients because they arrive on eno1 (still
acting as a client on the eero network until phase 2 cutover).
The trustedLegacyCidrs list is meant to be emptied in phase 2 when
eno1 becomes the ISP-facing WAN.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Adds services/router.nix with systemd-networkd (eno1=WAN via DHCP,
eth0=LAN 10.0.0.1/24), nftables (NAT + firewall, default drop on WAN
in), dnsmasq (DHCP only — AdGuard Home keeps :53 for DNS), and sysctl
IP forwarding. NetworkManager is forced off on this host.
Port forwards live in ports.toml at the repo root and are imported via
builtins.fromTOML. Supports single ports, ranges ("26901-26902"), and
"both" protocol. Initial forwards: 22, 80, 443, 26900, 26901-26902.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The quality-floor helper uses awk to compare floats (since jq output
can be 10 vs 10.0 depending on type). Without gawk on PATH, the check
failed silently and every run issued PUTs even when values already
matched.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Sonarr/Radarr default minSize=0 let through tiny sub-bitrate releases
(e.g. 163 MiB for a 40-min episode = 0.8 Mbps, unwatchable). Set min to
10 MB/min (~1.3 Mbps) across HDTV/WEBDL/WEBRip/Bluray 1080p so anything
below that is rejected on grab. Idempotent: only PUTs when value differs.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- services/adguard.nix: mutableSettings = false so Nix config overrides
UI-made changes on rebuild (settings are the source of truth)
- common.nix: add busybox for its collection of handy utilities
- common.nix: remove networking.nameservers — DNS now comes purely from
per-host NetworkManager config (AdGuard as the only resolver, no leaks)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
- adguard.nordhammer.it now routes through Authelia forward auth
(AdGuard Home itself has no login, so this becomes the single gate)
- Added Authelia ACL rule for the subdomain so default_policy=deny
returns 401 for redirect instead of 403
- Added AdGuard Home widget to Homepage under Infrastructure
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
DoH-only sequential upstreams made first-time lookups slow. Add plain
UDP 1.1.1.1/9.9.9.9 alongside DoH and set upstream_mode=parallel so
AdGuard queries all four simultaneously and uses the fastest response.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
New services/adguard.nix runs AdGuard Home on the mediaserver with DoH
upstreams (Cloudflare + Quad9) and three default blocklists. DNS listens
on :53; web UI on 127.0.0.1:3000, reverse-proxied at adguard.nordhammer.it.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Thread cap didn't move the thermals, so the real culprit is likely
dried-out thermal paste rather than concurrency. Reverting to the
unbounded default while the compound gets redone; running one stream
at a time is enough of a workaround in the meantime.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Concurrent transcodes on the 56-core mediaserver were running hot.
Limits each ffmpeg invocation to 8 threads via -threads and x265's
pools= param (libx265 ignores -threads alone). Overridable with
TRANSCODE_THREADS env var.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Overriding linuxPackagesFor doesn't affect the already-evaluated
linuxPackages_latest attribute. Extend it directly so the patched
facetimehd is picked up by boot.kernelPackages = pkgs.linuxPackages_latest.
https://claude.ai/code/session_01XEMg2HskwRaQW3nrCd1q2z
Without this rule the subdomain falls under default_policy=deny,
which returns 403 instead of the 401 that nginx needs to redirect
to the Authelia login page.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Proton-based clients (e.g. CachyOS native install hitting 7DTD via
the Proton runtime) fail EAC handshake against a Linux dedicated
server. Disabling server-side lets Proton clients join via the
"Play without EasyAntiCheat" splash option.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Lets 7DTD (and other native titles lacking built-in FSR) render
internally at a lower resolution and upscale to the 3440x1440
display via gamescope's FSR filter.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Publishes the container's web dashboard port only on host loopback
(127.0.0.1:8090) so nginx can reverse-proxy it with Authelia
forward-auth, matching the Homepage/camera vhost pattern. Also flips
WebDashboardEnabled to true in the XML patcher so the server actually
starts the web server.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Enables the previously-disabled game-servers module with a new 7DTD
container (vinanrra/7dtd-server) on ports 26900 TCP + 26900-26902 UDP.
A oneshot systemd service waits for LGSM's first install to drop
sdtdserver.xml, then patches in the server name, password, and
random-gen world before restarting the container. V-Rising is removed
— the module hadn't been imported, so this just drops dead code.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Sonarr was silently removing torrents from qBittorrent once imports
completed, killing seeding. Set removeCompletedDownloads to false for
both clients so torrents stick around and keep seeding post-import.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
record-update parses nvd diff after switch and writes latest.json;
Homepage polls a local-only nginx listener and renders date/changes/
closure/kernel via a customapi widget.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
The previous template targeted CSS variables that Homepage doesn't
actually expose at runtime, so only a handful of containers picked up
the theme. Targeting .bg-slate-*/text-slate-* directly replaces the
compiled Tailwind palette with matugen colors across the dashboard.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
btop is shared across all hosts, Homepage is mediaserver-only, and the
GNOME/Ghostty/VSCodium/Vesktop templates only apply to desktop hosts.
Emitting them everywhere made matugen error loudly on the server.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Mediaserver already had a btop.conf outside home-manager control, so
declarative adoption was refused. Setting force=true lets the managed
version take over.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
New nixpkgs defaults for the *arr services set UMask=0022, which
conflicts with the media-group-writable overrides. Wrap with
lib.mkForce alongside the existing Jellyfin fix.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
nixpkgs now sets UMask=0077 on the Jellyfin service, conflicting with
our override that ensures media-group writes. Wrapping with lib.mkForce
restores the intended permission bits.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Share the wallpaper symlink across all hosts by moving it from gnome.nix
into home-manager/fred.nix, and add matugen templates for btop and the
Homepage dashboard.
The Homepage NixOS module writes custom.css into /etc (read-only), so
bind-mount /var/lib/homepage-custom-css/custom.css over it. A systemd
path unit restarts homepage-dashboard whenever matugen rewrites the
file, so regeneration works without sudo.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Parse every Saved: entry in the log to compute cumulative original
size, new size, bytes saved, and percentage reduction so we have a
single command for the transcode impact.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Wayland/Mutter forces server-side decorations when the custom title bar
is collapsed, which looked worse than the slim custom bar. Reverting to
stock VSCodium with compact menu + no command center handled in user
settings.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
Using display:none removed the drag region entirely, which caused
GNOME/Mutter to fall back to server-side decorations. Collapsing the
title bar to 0 height keeps VSCodium's frameless state intact.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
